Automatic Bollard
Automatic bollards are designed especially for high security vehicle entrances and for a location that has to be closed for motorized traffic on specific times. They can be installed as a single unit as well as in groups. Bollards are driven hydraulically and the hydraulic drive unit is placed in an installation cabinet close to the bollards. In case of power failure bollards can be lowered manually. With the help of plc/microprocessor controlled electronics, raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint or hand shape, radio control, on/off switch or key switch etc. Besides, safety accessories like loop detectors, photocells, flashing lights or red/green lights can be integrated to the control electronics very easily.
Specification
- Pedestrianisation schemes
- Bus Lane Control
- Signaling light.
- Controlled parking
- Motorway service areas
Automatic Bollards
Features
| Technical Data | FORCE 525 (9343155) - FORCE 825 (9343156) | FORCE 525I (9343157) - FORCE 825I (9343158) |
| Power supply | 230 Va.c. 50/60 Hz | 230 Va.c. 50/60 Hz |
| Motor supply | 24 Vdc | 24 Vdc |
| Absorbed power | 90 W | 90 W |
| ABSORBED CURRENT 24 Vdc | 8 A | 8 A |
| STANDBY CONSUMPTION (up or down) | 11 W | 11 W |
| CONSUMPTION LOWERING (1 BOLLARD 1 CONTROL PANEL) | 1,4 A | 1.4 A |
| PROTECTION LEVEL | IP 68 | IP 68 |
| Protection level | IP 44 | IP 44 |
| OPERATING TEMPERATURE | - 20 C/+50 C | - 20 C/+50 C |
| KG VEHICLE-KM/HOUR | 2.500-55 | 2.500-55 |
| WEIGHT KG (without foundation case) | 155 | 167 Kgs |
New Products
Call Now
+91-9311903191 / 99
