Call Now +91-9311903191 / 99

CRASH RATED BARRIERS AND ROAD BLOCKER

Electromechanical /Hydraulics Drive Mechanisms with internal locking feature circuit controller for Auto Off in fully raised & lowered position with limit switches and manual operation in case of Power failure. Traffic barriers (some times called crash barriers or armco barriers) keep vehicles within their roadway and prevent vehicles from colliding with dangerous obstacles such as boulders, buildings, walls or large storm drains. Traffic barriers are also installed at the road side to prevent errant vehicles from traversing steep (non-recoverable) slopes or entering deep water. Traffic barriers are installed within medians of divided highways to prevent errant vehicles from entering the opposing carriageway of traffic and help to reduce head-on collisions. Some of these barriers, designed to be struck from either side, are called median barriers. Crash barriers can also be used to protect vulnerable areas like school yards, pedestrian zones or fuel tanks from errant vehicles.

Specification

  1. Blocking Height
  2. Blocking Beam Dimensions
  3. Opening-Closing
  4. Duty Cycle
  1. 110 cm
  2. 75mm X 75 mm
  3. 8 Sec
  4. 100%

Crash Barriers

ROAD BLOCKER

Electromechanical /Hydraulics Drive Mechanisms of road blocker consist of suitable size reversible motor, Oil Filled and sealed composite gear drive unit with internal locking feature circuit controller for Auto Off in fully raised & lowered position with limit switches and manual Operation in case of Power failure. PCB Electronic Circuit to automatically switch off motor in case of fault.

Specification

  1. Blocking Height above road level
  2. Thickness of the structural Component
  3. Steel Structure to be capable to withstand
  4. static impact loads of heavy vehicles
  1. 600mm (minimum)

  2. 12mm ( minimum)



  3. K4/K8 or K12

Road Barriers

New Products